Site Navigation

XPR-10S 2-Post Lift

SKU: GBP0XPR-10S3PH

RM18,100.00 RM14,698.00

In Stock

Chargeable add-ons, not included in item price:

– Workshop startup: site inspection
– Delivery
– Installation, commissioning & testing
– JKKP certification (recommended)
– JKKP site inspection (if applicable)

Please contact us for assistance!

In Stock
Part No.: XPR-10S
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: GBP0XPR-10S3PH Categories: , Tag:

Description

The XPR-10S is a reflection of our commitment to produce a car lift of the highest quality. Featuring the most advanced engineering in the industry, this lift is built to safety standards well above normal OSHA/ALI/ETL requirements.

PRODUCT FEATURES

  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53″ tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self-lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3″
  • Plated arm restraints and arm pins for rust prevention
  • Heavy-duty 1/2″ aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece 63 mm stackable adapter set comes standard
  • Triple-telescoping front arms
  • ETL Approved

PRODUCT SPECIFICATIONS

Item Description
Lifting capacity 4,536 kg
Max. lifting height 2,007 mm
Height overall 3,683 mm
Width overall 3,353 / 3,683 mm
Max. load per arm 1,134 kg
Motor 220 VAC / 60 Hz / 3 ph
Weight 791 kg

Bendpak XPR-10S

MLS-18 Mobile high-lift jack stand

SKU: GBP0MLS-18

RM7,420.00 RM5,674.00

In Stock

Chargeable add-ons, not included in item price:

– Workshop startup: site inspection
– Delivery
– Installation, commissioning & testing
– JKKP certification (recommended)
– JKKP site inspection (if applicable)

Please contact us for assistance!

In Stock
Part No.: MLS-18
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: GBP0MLS-18 Categories: , Tag:

Description

The MLS-18 Mobile Jack Stand is a support stand used to support raised, heavy-duty vehicles for maintenance and inspection procedures while typically on a two-post lift. Two 3″ diameter wheels make the MLS-18 mobile so you can position it easily under the manufacturer’s recommended lifting points.

PRODUCT FEATURES

  • Tripod design evenly distributes weight under load
  • Each leg is equipped with an 11 sq. in. floor pad
  • Can be easily moved and placed under a vehicle by means of two 3″ diameter wheels
  • Equipped with a foldaway transport handle
  • Center tube is spring-assisted to facilitate adjustment of the stand
  • Adjustable from 48.75″ to 74.5″
  • 9 pin positions
  • 1″ diameter self-locking ACME screw for fine adjustment of the stand height

Bendpak MLS-18

MD-6XP Mid-Rise frame lift / Portable

SKU: GBP0MD-6XP

RM12,171.00 RM9,307.00

In Stock

Chargeable add-ons, not included in item price:

– Workshop startup: site inspection
– Delivery
– Installation, commissioning & testing
– JKKP certification (recommended)
– JKKP site inspection (if applicable)

Please contact us for assistance!

In Stock
Part No.: MD-6XP
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: GBP0MD-6XP Categories: , Tag:

Description

PRODUCT FEATURES

  • 6,000-lb. lifting capacity
  • Perfect for servicing light-duty trucks and cars
  • Portable motor cart serves as tow handle to easily move lift from bay to bay
  • Adjustable arm assemblies
  • Safety lock bar with multiple lock positions
  • Fast and efficient operation
  • Truck adapters included free of charge

PRODUCT SPECIFICATIONS

Item Description
Lifting capacity 2,724 kg
Lift height w/o adapters 1,194 mm
Lowered height 121 mm
Lifting time 45 sec
Motor 110 VAC / 50-60 Hz / 1 ph
Weight 387 kg

Bendpak MD-6XP

HDS-18 4-Post Lift

SKU: GBP0HDS-18

RM45,148.00 RM34,525.00

In Stock

Chargeable add-ons, not included in item price:

– Workshop startup: site inspection
– Delivery
– Installation, commissioning & testing
– JKKP certification (recommended)
– JKKP site inspection (if applicable)

Please contact us for assistance!

In Stock
Part No.: HDS-18
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: GBP0HDS-18 Categories: , Tag:

Description

BendPak’s HDS-18 heavy-duty four-post truck lift is a brute. Bigger sheaves, beefier components and a legacy of dependability–get your hands on these massive truck lifts and bring a higher level of service to your garage or shop. BendPak’s HDS-Truck Series four-post hoists are a whole new breed of rugged. They’re newly engineered heavy-duty truck hoists that make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability and productivity.

PRODUCT FEATURES

  • Dual-hub cable sheaves
  • Heavy-duty aircraft cable
  • Built-in lubrication
  • Hidden hydraulic cylinder
  • The hydraulic cylinder
  • Flow restrictor
  • Durable powder coat
  • Large base plates
  • Spring-loaded safety locks
  • Push-button pneumatic lock release
  • Secondary lock system
  • Integrated design
  • Adjustable height locking positions
  • Electric hydraulic power system
  • Non-skid runways
  • Longer approach ramps
  • Flexible protective conduit
  • Rolling bridge jacks

PRODUCT SPECIFICATIONS

Item Description
Lifting capacity 8,165 kg
Max. rise 1,524 mm
Max. lifting height 1,740 mm
Overall width 3,912 mm
Outside length 5,105 mm
Overall length 6,121 mm
Length of runways 5,156 mm
Motor 220 VAC, 60 Hz / 1ph
Weight 2,220 kg

HDS-14 4-Post Lift

SKU: GBP0HDS-14

RM26,014.00 RM19,893.00

Out of stock

Chargeable add-ons, not included in item price:

– Workshop startup: site inspection
– Delivery
– Installation, commissioning & testing
– JKKP certification (recommended)
– JKKP site inspection (if applicable)

Please contact us for assistance!

Out of stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: GBP0HDS-14 Categories: , Tag:

Description

BendPak’s HDS-14 four-post lift is a whole new breed of rugged. It features superior components that work better, are built to last and increase operator safety. If your service bay needs to get under heavy-duty, oversized vehicles on a daily basis, this lift is what you need.

PRODUCT FEATURES

  • Extended runways
  • Dual-hub cable sheaves
  • Heavy-duty aircraft cable
  • Built-in lubrication
  • Flow restrictor
  • Large base plates
  • Spring-loaded safety locks
  • Push-button pneumatic lock release
  • Secondary lock system
  • Integrated design
  • Adjustable height locking positions
  • Electric-hydraulic power system
  • Longer approach ramps
  • Flexible protective conduit

PRODUCT SPECIFICATIONS

Item Description
Lifting capacity 6,350 kg
Max. rise 1,822 mm
Max. lifting height 1,969 mm
Overall width 3,346 mm
Overall length 6,131 mm
Length of runways 5,054 mm
Motor 220 VAC, 60 Hz / 1ph
Weight 1,182 kg

Bendpak HDS-14

SALE
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
×

Hello!

Click one of our contacts below to chat on WhatsApp

× Chat with us!